Why choose copper for custom badge accessories butterfly hat?

Butterfly hats are commonly used accessories in custom badges, and are generally used with spurs. Generally speaking, the best quality butterfly hats are copper and brass, and the wings on both sides of the butterfly hat are very elastic. The wings on both sides of the butterfly cap are the key parts to take out the spikes. If they are too loose, they cannot be clamped, and if they are too tight, it is difficult to remove them. Hands cannot be scratched around the butterfly hat, and the top cannot be penetrated. Butterfly hats are generally not electroplated. The reason for not electroplating is that electroplating will harden the wings on both sides and make the product lose its elasticity.



Of course, if it needs to be processed, gold plating or nickel plating can be used, but the elasticity will be lost. The copper thickness of commonly used butterfly caps is currently divided into 0.2mm/0.25mm/0.3mm; the thickness of iron butterfly caps is 0.25mm. custom badge

0.3mm is the most commonly used butterfly cap in the industry. The top of the 0.3mm butterfly cap is not easy to penetrate, and the 0.2mm can be penetrated with a light touch, and the texture is very light. 0.25mm is better than 0.2mm, but it will also penetrate. Some manufacturers will use thinned butterfly caps because the price is low. Changing the thickness can reduce the cost, but the quality has declined.



The iron butterfly cap is 0.25mm thick, which is hard enough, and there is relatively no problem of penetration. But because iron is relatively hard, it is not easy to use, and the iron butterfly cap needs electroplating. Because it is already hard enough, the electroplating should not be too thick. If the plating is too thick, the wings on both sides of the butterfly cap will not be elastic. Another problem is that the iron butterfly cap will rust.